Insert or remove the SIM/SD cards on the moto e6

Remove back cover

1. Turn your phone upside down, and put your fingernail in the notch on the bottom corner.
   
2. Pry off the cover. Don’t be afraid to use a little muscle.
   

 Replace SIM or SD card

1. To remove the SD card, slide it out.
2. To remove the SIM card, slide the pin forward.
   
   Then, pull the card out.
   
   
3. To insert a SIM, slide it into the SIM slot with gold contacts facing down.
   
   
    
4. To insert an SD card, slide the SD card into the slot on top of the SIM.
   
   

 Replace Back Cover

1. Line up the back cover over the fingerprint sensor.
2. Snap the cover on.