Lenovo

TX550 Multipoint function

Can I have more than one phone connected using this device?

Yes, the TX550 supports advanced Multipoint. If two phones that were previously paired with the TX500 are both in the car, the TX500 will monitor both phones for incoming calls.  A call on either phone can be answered by pressing the TX500 Call button.

If there is an ongoing call on one phone and a call comes in on the second phone, you will able to switch to the second call by pressing the Call button.


To pair the H17txt , follow the steps listed below:

Pair and Connect First Phone

  • Turn off any Bluetooth devices previously paired with your speaker.
  • Turn on the Bluetooth feature of your phone. (You may need to contact the manual or manufacturer of your phone.)
  • Turn on your speaker
  • You will hear "ready to pair" This means that the SONIC RIDER is in discoverable mode.
  • The SONIC RIDER will tell you what to do in order to connect to your phone. Follow these voice prompts.
  • When your speaker pairs with your phone, you will hear "pairing complete".
  • Once the connection is completed you will hear "phone 1 connected."

Pair and Connect Second Phone

  1. Turn off the first phone you paired with the SONIC RIDER.
  2. Turn on the Bluetooth feature of the second phone you are attempting to pair. (You may need to contact the manual or manufacturer of your phone.
  3. Turn on your SONIC RIDER. You will hear "ready to pair" This means that the SONIC RIDER is in discoverable mode.
  4. The SONIC RIDER will tell you what to do in order to connect to your phone. Follow these voice prompts.
  5. When your device pairs with your phone, you will hear "pairing complete".
  6. Once the connection is completed you will hear "phone 2 connected."
  7. Power on the first phone you connected to the SONIC RIDER
  8. You will hear "phone 2 connected" once the SONIC RIDER is connected to both phones.

Reconnecting one or both of the phones

  1. If you would like to reconnect the SONIC RIDER to a device it has been paired with, you simply have to power on the SONIC RIDER by turning the device on.
  2. Your phone will receive a Bluetooth connection request from the SONIC RIDER.
  3. Accept the Bluetooth connect request.
  4. If you would like to connect the second device, power the device on and follow the above steps.

Was this information helpful?

Your feedback helps to improve this site.