Lenovo

Making & Receiving Calls with the Car Kit

How do I make or receive calls?


Your T605 car kit allows you to make and receive phone calls from your Bluetooth-enabled phone.

Note: Before you can use your Bluetooth-enabled phone, you must first 

The following table provides details for making and receiving calls from your connected phone using your car kit:

Note: Some features are phone/network dependent.

Make a Call
(Hand Dial)
Phone: On-in idle
Car Kit: On

Enter phone number on phone, press Send key on phone, phone dials call.
Make a Call
(Voice Dial) 
Phone: On-in idle
Car Kit: On

Press and hold green (SEND) button for 2-6 seconds, wait for prompt from phone,
speak name, phone dials call. 
Redial Last Number  Phone: On-in idle
Car Kit: On

Press green (SEND) button.

Note: This feature is available only in Connected mode. 
Receive (Answer) a Call  Phone: On-phone rings
Car Kit: On-indicator light flashes quickly in blue

Press green (SEND) button. While call is active, indicator light flashes slowly in blue.
If music is playing, it is paused when on a call. 
Change Call Volume  Phone: On-in call
Car Kit: On-indicator light flashes slowly in blue

Press blue (UP ARROW) button to increase or
blue (DOWN ARROW) button to decrease.

Note: You can also adjust call volume from your phone (if supported by phone).
End a Call  Phone: On-in call
Car Kit: On-indicator light flashes slowly in blue

Press red (END) button.
To end a call on hold, press green (SEND) button to make call active, then press red
(END) button to end call.
If music was playing when call was answered, it is resumed when call is ended.
Reject a Call  Phone: On-phone rings
Car Kit: On-indicator light flashes quickly in blue

Press red (END) button.
Mute/Unmute a Call  Phone: On-in call
Car Kit: On-indicator light flashes slowly in blue

Press MFB button.
While muted, indicator light flashes slowly in purple 
Answer Second
Incoming Call 
Phone: On-in call, 2nd call incoming
Car Kit: On-indicator light flashes quickly in blue until call is answered

Press green (SEND) button, places first call on hold, answers incoming call. When
call is on hold, indicator light flashes quickly in blue. 
Reject Second
Incoming Call 
Phone: On-in call, 2nd call incoming
Car Kit: On-indicator light flashes quickly in blue

Press red (END) button.
Switch Between Two Calls
(Active & On Hold) 
Phone: On-in call, 2nd call on hold
Car Kit: On-indicator light flashes slowly in blue

Press green (SEND) button. 
Link Two or 3-Way Conference
(Active & Incoming or
On Hold Calls) 
Phone: On-in call, 2nd call on hold
Car Kit: On-indicator light flashes slowly in blue

Press and hold MFB button for 2-6 seconds.
Transferring Call from Car Kit
to Phone (Privacy Mode) 
Phone: On-in call
Car Kit: On-indicator light flashes slowly in blue

Press and hold green (SEND)

Was this information helpful?

Your feedback helps to improve this site.