I’m Moli, your virtual agent. I can help with Moto phone issues.


Bluetooth™ - moto x4

Using Bluetooth™ on the moto x4

To connect with a new Bluetooth accessory or other device, you need to pair with it. You only need to do this once for each device.

After connecting with a device, you can use Bluetooth to:

  • Make or receive calls with a headset
  • Make or receive calls and play music over your car's audio system
  • Transfer music
  • Share photos
  • Share contacts
  • Share your phone's Internet connection with your computer

Tip: Bluetooth connections can really drain your battery. Save power by turning Bluetooth off when you are not connected to a device.

Pair with a Bluetooth device

  1. Set the device you want to pair (accessory, computer, other phone, etc.) to Bluetooth discovery mode so that your phone can find it. See the device manufacturer’s instructions.
  2. On your phone, go to Settings and touch Connected Devices.
  3. Touch Image

    As the phone searches for available devices, you'll see Image. To refresh the list of available devices, touch Image > Refresh.
  4. Touch an available device to connect.
  5. Do any of the following:

    • If a pairing code appears on your phone and Bluetooth device, make sure the codes match. (If they don't, touch Cancel, verify the name of the device you want to pair with, and try again.) If available, use check boxes to select which phone features the paired device can access (like contacts, phone audio, Internet access).
    • If your device shows a passkey (like 0000 or 1234), enter it on your phone. If you don't see a place to enter it, swipe down from the top of your screen and touch the Bluetooth notification.
    • If your device doesn't show a passkey and you must enter one for the device to pair, see the device manufacturers' instructions.
  6. Touch Pair on your phone AND touch the pairing prompt on the other device. If you don't confirm on both devices, pairing will fail.

Tip: If you use a screen lock on your phone, you can designate a paired Bluetooth device as a trusted device to allow your phone to remain unlocked while connected to it.

Reconnect with a Bluetooth device

  1. Open quick settings and touch Image to turn it on.
  2. Turn on the Bluetooth device.

Turn Bluetooth off

Bluetooth uses more of your battery, so turn it off when not in use.

Open quick settings and touch Image to turn it off.

Change your phone name

Your phone name identifies your phone in a Bluetooth network. You can change the name.

  1. Go to Settings and touch Connected Devices.
  2. Make sure Bluetooth is on.
  3. Touch Image > Device name

Was this information helpful?

Your feedback helps to improve this site.