icon close menu menu hamburguer
banner main blog
Icon Home  

How do I reset the moto x pure edition?

In the unlikely event that your device becomes unresponsive, frozen, blank or black screen, or will not respond to the power button, you can perform a force restart on the device by following the steps below.

Press and hold the Power button for 10 - 20 seconds, the device will restart and go through the boot-up sequence.

Note: The forced restart or reboot will not delete any data on your phone.  



Factory Data Reset is a tool used to remove everything that was imported, added or installed on the device. Keep in mind, when using this feature everything is deleted. 

To reset your device:

1.  Touch Image  

2.  Touch Settings

3.  Touch Backup & reset

4.  Touch Factory Data Reset

5.  Touch Reset Phone

** DO NOT CHECK THE BOX TO ERASE PERSONALIZED CONTENT



External Reset

If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.

Notes:

When using this feature; everything is deleted from the device.

Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.

  1. With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
  2. Press the Volume Down button to highlight "Recovery mode"
  3. Press the Power button to restart into Recovery mode.
    You'll see an image of an Android robot with a red exclamation mark.
  4. While holding down the Power button, press the Volume Up button.
  5. Use the volume buttons to scroll to "wipe data/factory reset" and press the Power button to select it.
  6. Scroll down to "Yes - erase all user data" and press the Power button to select it.

** DO NOT SELECT ERASE USER DATA AND PERSONALIZED CONTENT.

Was this answer helpful?

Let's stay in touch: