Lenovo

T603 - T605 - Call Functions

What are the call functions for the T603 - T605?


The following table provides details for making and receiving calls from your connected phone using your car kit:

Note: Some features are phone/network dependent.

 

 Call Function  Phone  T603 - T605
Make a Call
(Hand Dial)
On-in idle On
Enter phone number on phone, press
Send key on phone, phone dials call.
Make a Call
(Voice Dial)
On-in idle On
Press and hold green (SEND) button for
2-6 seconds, wait for prompt from phone,
speak name, phone dials call.
Redial Last
Number
On-in idle On
Press green (SEND) button.

Note: This feature is available only in Connected mode.
 Receive (Answer)
a Call
On–phone rings On–indicator light flashes quickly in blue

Press green (SEND) button. While call is active, indicator
light flashes slowly in blue.

If music is playing, it is paused when on a call.
Change Call Volume On–in call On–indicator light flashes slowly in blue

Press blue (UP ARROW) button to increase or
blue (DOWN ARROW) button to decrease.

Note: You can also adjust call volume
from your phone (if supported by phone)
 End a Call On–in call On–indicator light flashes slowly in blue

Press red (END) button.

To end a call on hold, press green (SEND) button to make
call active, then press red (END) button to end call.

If music was playing when call was answered, it is
resumed when call is ended.
 Reject a Call On–phone rings On–indicator light flashes quickly in blue

Press red (END) button.
Mute/Unmute
a Call
On–in call On–indicator light flashes slowly in blue

Press MFB button.

While muted, indicator light flashes slowly in purple
Answer Second
Incoming Call
 On–in call,
2nd call incoming
On–indicator light flashes quickly in blue until call is answered

Press green (SEND) button, places first call on hold, answers incoming call.
When call is on hold, indicator light flashes quickly in blue.
Reject Second
Incoming Call
 On–in call,
2nd call incoming
On–indicator light flashes quickly in blue

Press red (END) button.
Switch Between
Two Calls
(Active & On Hold)
 On–in call,
2nd call on hold
On–indicator light flashes slowly in blue

Press green (SEND) button.
 Link Two  -
3-way Conference
 On–in call,
2nd call on hold
On–indicator light flashes slowly in blue

Press and hold MFB button for 2-6 seconds.
Transferring Call from
Car Kit to Phone
(Privacy Mode)
 On–in call On–indicator light flashes slowly in blue

Press and hold green (SEND) button for 2-6 seconds.

Note: Some phones require you to press and hold the MFB button twice.
Transferring Call from
Phone to Car Kit
 On–in call On

Press and hold green (SEND) button for 2-6 seconds.

Note: Some phones require you to press and hold the MFB button twice.
Change Ring
Tone/Alert
Tone Volume
 On–in idle On

Press blue (UP ARROW/DOWN ARROW) buttons.

Was this information helpful?

Your feedback helps to improve this site.