What do the various lights indicate?
|
INDICATOR LIGHT
|
|
| Headset Indicator | Headset Status |
| Off | Power off |
| Three blue flashes | Powering on/off |
| Steady blue | Pairing mode |
| Quick blue/purple flashes | Pairing successful |
| Quick blue flash | Incoming/outgoing call on primary phone |
| Quick purple flash | Incoming/outgoing call on secondary phone |
| Slow blue pulse | Connected (on a call) |
| Slow blue flash | Standby (phone connected--not on a call) |
| Slow green flash | Standby (two phones connected--not on a call) |
Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on.
Note: To disable the indicator light, press and hold both Volume buttons while turnng headset on.
|
INDICATOR LIGHT
|
|
| Headset Indicator
|
Headset Status
|
| Red Flash | Idle (not connected to phone) |
| Slow purple pulse | Connected call muted |
| Quick red flash | Low battery |
Tip: Set your primary and secondary phones to different ringtones to know which phone is ringing when wearing the
headset.
Was this information helpful?
Your feedback helps to improve this site.