Lenovo

H790 Bond/Pair with Two Devices


The H790 is a very nice Bluetooth nice with new features. This headset can actually pair and control 2 phones at the same time. If you would like to pair this device, follow the steps listed below.

  1. Pair and Connect First Phone

  • Turn off any Bluetooth devices previously paired with your headset.
  • Turn on the Bluetooth feature of your phone. (You may need to contact the manual or manufacturer of your phone.)
  • Place the headset on your ear.
  • Turn on your headset by sliding the power switch to a position where no red is shown under the switch. This is the on position.
  • You will hear "ready to pair" This means that the H790 is in discoverable mode.
  • The H790 will tell you what to do in order to connect to your phone. Follow these voice prompts.
  • When your headset pairs with your phone, you will hear "pairing complete".
  • Once the connection is completed you will hear "phone 1 connected."

  1. Pair and Connect Second

  • Turn off the first phone you paired with the H790.
  • Turn on the Bluetooth feature of the second phone you are attempting to pair. (You may need to contact the manual or manufacturer of your phone.)
  • Place the headset on your ear.
  • Turn on your headset by sliding the power switch to a position where no red is shown under the switch. This is the on position.
  • You will hear "ready to pair" This means that the H790 is in discoverable mode.
  • The H790 will tell you what to do in order to connect to your phone. Follow these voice prompts.
  • When your headset pairs with your phone, you will hear "pairing complete".
  • Once the connection is completed you will hear "phone 1 connected."
  • Power on the first phone you connected to the H790
  • You will "hear phone 2 connected" once the H790 is connected to both phones.

  1. Reconnecting one or both of the phones.

  • If you would like to reconnect the H790 to a device it has been paired with, you simply have to power on the H790.
  • Your phone will receive a Bluetooth connection request from the H790.
  • Accept the Bluetooth connect request.
  • If you would like to connect the second device, power the device on and follow the above steps.

Was this information helpful?

Your feedback helps to improve this site.