How do I make or receive calls?
Your T603/T605 car kit allows you to make and receive phone calls from your Bluetooth-enabled phone.
Note: Before you can use your Bluetooth-enabled phone, you must first create a paired link.
The following table provides details for making and receiving calls from your connected phone using your car kit:
Note: Some features are phone/network dependent.
Make a Call
(Hand Dial) |
Phone: On-in idle
T603/5: On Enter phone number on phone, press Send key on phone, phone dials call. |
Make a Call
(Voice Dial) |
Phone: On-in idle
T603/5: On Press and hold green (SEND) button for 2-6 seconds, wait for prompt from phone, speak name, phone dials call. |
Redial Last Number | Phone: On-in idle
T603/5: On Press green (SEND) button. Note: This feature is available only in Connected mode. |
Receive (Answer) a Call | Phone: On - phone rings
T603/5: On -indicator light flashes quickly in blue Press green (SEND) button. While call is active, indicator light flashes slowly in blue. If music is playing, it is paused when on a call. |
Change Call Volume | Phone: On - in call
T603/5: On - indicator light flashes slowly in blue Press blue (UP ARROW) button to increase or blue (DOWN ARROW) button to decrease. Note: You can also adjust call volume from your phone (if supported by phone). |
End a Call | Phone: On - in call
T603/5: On - indicator light flashes slowly in blue Press red (END) button. To end a call on hold, press green (SEND) button to make call active, then press red (END) button to end call. If music was playing when call was answered, it is resumed when call is ended. |
Reject a Call | Phone: On - phone rings
T603/5: On - indicator light flashes quickly in blue Press red (END) button. |
Mute/Unmute a Call | Phone: On - in call
T603/5: On - indicator light flashes slowly in blue Press MFB button. While muted, indicator light flashes slowly in purple |
Answer Second
Incoming Call |
Phone: On - in call, 2nd call incoming
T603/5: On - indicator light flashes quickly in blue until call is answered Press green (SEND) button, places first call on hold, answers incoming call. When call is on hold, indicator light flashes quickly in blue. |
Reject Second
Incoming Call |
Phone: On - in call, 2nd call incoming
T603/5: On - indicator light flashes quickly in blue Press red (END) button. |
Switch Between Two Calls
(Active & On Hold) |
Phone: On - in call, 2nd call on hold
T603/5: On - indicator light flashes slowly in blue Press green (SEND) button. |
Link Two or 3-Way Conference
(Active & Incoming or On Hold Calls) |
Phone: On - in call, 2nd call on hold
T603/5: On - indicator light flashes slowly in blue Press and hold MFB button for 2-6 seconds. |