Lenovo

MOTONAV - Connect to a Bluetooth Device

How do I connect to a Bluetooth device?


  1. If connecting to a Blue tooth device for the first time, place the device in pairing (discoverable) mode.

    On most Motorola headphones and headsets, press and hold the Power/Call button for about 5 seconds until the indicator light turns on and remains steadily lit. For other Blue tooth devices, refer to the device product guide.
  2. On your phone, press Settings (or Office Tools > Settings) > Connections > Blue tooth > Search for Devices

    Note: If this is the first time connecting to a Blue tooth device, your phone prompts you to place the device in pairing mode. Press OK.
  3. Select the device you want to connect to.
    If prompted, enter the pass code (0000 or 1234 for Motorola Blue tooth devices) and press Confirm.
    A Blue tooth indicator appears in the top status bar when you're connected.

Bluetooth Tips:

  • To disconnect your phone from a Blue tooth device, turn off the device.
  • Once you've paired your phone to a Blue tooth device, for most devices it’s easy to reconnect. Just turn on the device and you're connected.
  • If you have trouble reconnecting to a device you have used before, make sure your phone’s Blue tooth power is turned on. Press Blue tooth Link > Setup > Power > On.
  • To extend your phone’s battery life, turn off Blue tooth power when not in use. Press Blue tooth Link > Setup > Power > Off.
  • Place Blue tooth in the home screen for a shortcut. Press Settings > Personalize > Home Screen > Home Keys.

Was this information helpful?

Your feedback helps to improve this site.