What are the call functions for the T605?
The following table provides details for making and receiving calls from your connected phone using your car kit:
Note: Some features are phone/network dependent.
Call Function | Phone | T603 - T605 |
Make a Call (Hand Dial) |
On-in idle | On Enter phone number on phone, press Send key on phone, phone dials call. |
Make a Call (Voice Dial) |
On-in idle | On Press and hold green (SEND) button for 2-6 seconds, wait for prompt from phone, speak name, phone dials call. |
Redial Last Number |
On-in idle | On Press green (SEND) button. Note: This feature is available only in Connected mode. |
Receive (Answer) a Call |
On–phone rings | On–indicator light flashes quickly in blue Press green (SEND) button. While call is active, indicator light flashes slowly in blue. If music is playing, it is paused when on a call. |
Change Call Volume | On–in call | On–indicator light flashes slowly in blue Press blue (UP ARROW) button to increase or blue (DOWN ARROW) button to decrease. Note: You can also adjust call volume from your phone (if supported by phone) |
End a Call | On–in call | On–indicator light flashes slowly in blue Press red (END) button. To end a call on hold, press green (SEND) button to make call active, then press red (END) button to end call. If music was playing when call was answered, it is resumed when call is ended. |
Reject a Call | On–phone rings | On–indicator light flashes quickly in blue Press red (END) button. |
Mute/Unmute a Call |
On–in call | On–indicator light flashes slowly in blue Press MFB button. While muted, indicator light flashes slowly in purple |
Answer Second Incoming Call |
On–in call, 2nd call incoming |
On–indicator light flashes quickly in blue until call is answered Press green (SEND) button, places first call on hold, answers incoming call. When call is on hold, indicator light flashes quickly in blue. |
Reject Second Incoming Call |
On–in call, 2nd call incoming |
On–indicator light flashes quickly in blue Press red (END) button. |
Switch Between Two Calls (Active & On Hold) |
On–in call, 2nd call on hold |
On–indicator light flashes slowly in blue Press green (SEND) button. |
Link Two - 3-way Conference |
On–in call, 2nd call on hold |
On–indicator light flashes slowly in blue Press and hold MFB button for 2-6 seconds. |
Transferring Call from Car Kit to Phone (Privacy Mode) |
On–in call | On–indicator light flashes slowly in blue Press and hold green (SEND) button for 2-6 seconds. Note: Some phones require you to press and hold the MFB button twice. |
Transferring Call from Phone to Car Kit |
On–in call | On Press and hold green (SEND) button for 2-6 seconds. Note: Some phones require you to press and hold the MFB button twice. |
Change Ring Tone/Alert Tone Volume |
On–in idle | On Press blue (UP ARROW/DOWN ARROW) buttons. |