Lenovo

Charge the MOTOPURE H15

How can I charge the MOTOPURE H15?


You need to charge your headset using the travel charger or desktop charger.

Charging with travel charger:

  1. Remove plastic seal off of ear cushion on speaker.
  2. Plug the Motorola charger into the end of the headset.

    The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns green.
  3. Disconnect the charger.

Note: Headset is not functional while charging with travel charger.


Charging with desktop charger:

  1. Plug in the travel charger into the charger port.
  2. Plug the headset into the port on the desktop charger as shown above.

    The desktop charger light is lit, and the headset indicator light turns red when the battery is charging. It may take up to 1 minute for the headset indicator light to turn on. When the headset's battery is fully charged (about 2
    hours), the headset indicator light turns green.
  3. Remove headset from charger when ready to use.

Note: Headset is functional while charging with desktop charger with the boom open. To operate, remove from charger.

Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.

Was this information helpful?

Your feedback helps to improve this site.